Metal Detectors

Raybotix is one of India’s leading Security equipment source. With expertise in Metal Detection, having an in-house R&D setup and manufacturing facility, we work closely with our customers to gain a deeper understanding of their requirements. This enables us to constantly improve and upgrade our products at pace with changing times. We strive for quality and Innovation; this enables us to constantly surpass the level of quality and innovation which our clients anticipated.

A metal detector is an electronic device which detects the presence of metal nearby. Metal detectors are useful for finding metal inclusions hidden within objects, or metal objects buried underground. They often consist of a control unit with sensors which can, If the sensor comes near a piece of metal this is indicated by a visually and audibly.

We are the leading manufacturer of metal detector from the past 30 years with a wide range of products with stringent quality control parameters in place, our products are manufactured using only latest technology and equipment.

Our production units are operating out of a state-of-the-art facility which is backed by a strong R&D unit. Our attractive metal detectors are appealing to the eye with their striking designs – made possible by the artistic people in our workforce. Our products go through rigorous quality tests before being made available in the market. We are constantly innovating and trying to improve the quality of our products. With the aid of our large distribution network, we have been able to deliver consignments within stipulated timeframes.

RTPL – 33Z

RTPL – 33Z is a high performance 33 zone walkthrough metal detector which meets all international security standards. Each detection zone functions as an independent detector and automatically increases discrimination by reducing the cumulative signal effect caused by distributed harmless objects.

A full-height light bar displays the location of the detected metal masses in transit. This results in rapid identification of threat and a reduction of manual searches. LED bar-graph, indicator lamps, sensitivity and alarm controls are provided in the console at the top of the door frame. The detection capability is independent of the transit speed.

Components of the highest quality and proven reliability are employed in the manufacture of RTPL – 33Z to ensure a long, trouble-free life. A mother board system with plug-in cards is employed for minimum down time and ease of serviceability. DSP provides greater sensitivity, noise immunity, discrimination, detection uniformity, and overall product reliability.

    Features:

  • High performance multi-zone detection
  • 33 detection zones for accurate pinpointing of metal
  • Exceptional Immunity to external interferences
  • Very high sensitivity suitable for anti-theft applications
  • Quick installation – minimal training required
  • Auto calibration - Does not require zero adjustment
  • Detects all metals, alloys and ferrites
  • 250 levels of zone wise sensitivity adjustment
  • LED bar graph signal strength indicator
  • LED based composite zone display
  • Access to programming protected by password
  • Intelligent people counter for entry, exit and algebraic sum
  • SMPS power supply for use with 90V to 270V
  • Built in full-function battery backup for over 12 hours
  • Easy to mount and assemble
  • Wireless remote control

RTPL – 18Z

RTPL-18Z is a high performance 18 zone walkthrough metal detector. Each detection zone functions as an independent detector and automatically increases discrimination by reducing the cumulative signal effect caused by distributed harmless objects. A full-height light bar displays the location of the detected metal masses in transit. This results in rapid identification of threat and a reduction of manual searches. LED bar-graph, indicator lamps, sensitivity and alarm controls are provided in the console at the top of the door frame. Components of the highest quality and proven reliability are employed in the manufacture of RTPL – 18Z to ensure a long, trouble-free life. A mother board system with plug-in cards is employed for minimum down time and ease of serviceability.

    Features:

  • Microcontroller based design.
  • High performance multi-zone detection.
  • 18 detection zones for accurate pinpointing of metal.
  • Very high sensitivity suitable for anti-theft application.
  • Quick installation – minimal training required.
  • Auto calibration - Does not require zero adjustment.
  • Detects all metals, alloys and ferrites.
  • 200 levels of zone wise sensitivity adjustment.
  • LED bar graph signal strength indicator.
  • LED based composite zone display.
  • Access to programming protected by password.
  • Intelligent people counter for entry, exit and algebraic sum.
  • SMPS power supply for use with 90V to 270V.
  • Built in full-function battery backup for over 12 hours.
  • Easy to mount and assemble.
  • Wireless remote control (Optional).

RTPL– 9Z

RTPL – 9Z is a high performance 9 zone walkthrough metal detector. Each detection zone functions as an independent detector and automatically increases discrimination by reducing the cumulative signal effect caused by distributed harmless objects. A full-height light bar displays the location of the detected metal masses in transit. This results in rapid identification of threat and a reduction of manual searches. LED bar-graph, indicator lamps, sensitivity and alarm controls are provided in the console at the top of the door frame. Only components of the highest quality and proven reliability are employed in the manufacture of RTPL – 9Z to ensure a long, trouble-free life. A mother board system with plug-in cards is employed for minimum down time and ease of serviceability.

    Features:

  • Microcontroller based design.
  • Low cost multi-zone detection.
  • 9 detection zones for accurate pinpointing of metal.
  • Quick installation – minimal training required.
  • Auto calibration - Does not require zero adjustment.
  • Detects all metals, alloys and ferrites.
  • 200 levels of zone wise sensitivity adjustment.
  • LED bar graph signal strength indicator.
  • LED based composite zone display.
  • Access to programming protected by password.
  • Intelligent people counter for entry, exit and algebraic sum.
  • SMPS power supply for use with 90V to 270V.
  • Built in full-function battery backup for over 12 hours.
  • Easy to mount and assemble.
  • Wireless remote control (Optional).

RTPL – 8Z

Each detection zone functions as an independent detector and automatically increases discrimination by reducing the cumulative signal effect caused by distributed harmless objects. A full-height light bar displays the location of the detected metal masses in transit. This results in rapid identification of threat and a reduction of manual searches. LED bar-graph, indicator lamps, sensitivity and alarm controls are provided in the console at the top of the door frame. Only components of the highest quality and proven reliability are employed in the manufacture of RTPL – 8Z to ensure a long, trouble-free life. A mother board system with plug-in cards is employed for minimum down time and ease of serviceability.

    Features:

  • High performance multi-zone detection
  • 8 detection zones for accurate pinpointing of metal
  • Exceptional Immunity to external interferences
  • DSP provides greater sensitivity and noise immunity
  • Quick installation – minimal training required
  • Auto calibration - Does not require zero adjustment
  • Detects all metals, alloys and ferrites
  • 250 levels of zone wise sensitivity adjustment
  • LED bar graph signal strength indicator
  • LED based composite zone display
  • Access to programming protected by password
  • Intelligent people counter for entry, exit and algebraic sum
  • SMPS power supply for use with 90V to 270V
  • Built in full-function battery backup for over 12 hours
  • Easy to mount and assemble
  • Wireless remote control

RTPL – DZ

RTPL-DZ is industry's first low cost dual-zone walkthrough metal detector. It has been developed to detect clandestine ferrous and non-ferrous metals on the body of a person when asked to pass through the doorframe. It is also equipped with an intelligent LCD counter to indicate the IN, OUT and algebraic sum of the traffic passing through the door frame. Bar-graph, indicator lamps, sensitivity and alarm controls are provided in the console at the top of the door frame. Only components of the highest quality and proven reliability are employed in the manufacture of RTPL – DZ to ensure a long, trouble-free life. A mother board system with plug-in cards is employed for minimum downtime and ease of serviceability.

    Features:

  • Microcontroller based design.
  • Low cost Dual-zone detector.
  • Quick installation – no training required.
  • Automatic zero adjustment.
  • LED based Bar-graph indicator.
  • Intelligent people counter for entry, exit and algebraic sum.
  • Walk and Stop indicators to regulate traffic.
  • Detects all metals, alloys and ferrites.
  • SMPS power supply for use with 90V to 270V.
  • Built in full-function battery backup for over 12 hours.
  • Easy to mount and assemble.

Accessories (Optional)

BASE WHEELS

  • Base wheels for door frame metal detectors to shift them easily.
  • Make your door frame locomotive and reduce the man power.

WEATHER PROTECTED HAT

Make the door frame metal detectors secured from rain by using weather protected hat. It will cover the head of door frame metal detectors and prevent the rain water to enter into its electronics.

SOFTWARE

DFMD-PC Network Interface to monitor entire operation of your door frame

IP Based connectivity with following monitoring functions-

  • Counter
  • Alarm
  • Affected zones etc

CAMERA WITH DVR

Have complete look of who is passing through your door frame detectors with the camera inbuilt with DVR.

RTPL – I

RTPL – I ONE is low cost single-zone walkthrough metal detector. It has been developed to detect clandestine ferrous and non-ferrous metals on the body of a person when asked to pass through the doorframe. It is also equipped with an intelligent LCD counter to indicate the IN, OUT and algebraic sum of the traffic passing through the door frame. Bar-graph, indicator lamps, sensitivity and alarm controls are provided in the console at the top of the door frame. Only components of the highest quality and proven reliability are employed in the manufacture of RTPL – I to ensure a long, trouble-free life. A mother board system with plug-in cards is employed for minimum downtime and ease of serviceability.

    Features:

  • Low cost single zone detector.
  • Quick installation – no training required.
  • Automatic zero adjustment.
  • LED based Bar-graph indicator.
  • Intelligent people counter for entry, exit and algebraic sum.
  • Walk and Stop indicators to regulate traffic.
  • Detects all metals, alloys and ferrites.
  • SMPS power supply for use with 90V to 270V.
  • Built in full-function battery backup for over 12 hours.

RTPL – II

RTPL – II is a reliable single piece walk-through metal detector system that does not require a separate control unit. It has been developed to detect clandestine ferrous and non-ferrous metals on the body of a person when asked to pass through the doorframe. It is also equipped with an intelligent 5 digit back-lit LCD counter to indicate the in, out and algebraic sum of the traffic going through the door frame. It has been designed for fast installation and operation under all environments. Long life LED Walk/Stop indicators are incorporated on top of the doorframe to regulate the flow of traffic. All controls and audio / visual alarms such as piezo transducer, LED bar graph, indicator lamps and sensitivity controls are provided at the rear top of the door..

    Features:

  • Automatic zero adjustment.
  • Quick installation – no training required.
  • Ignores external metals.
  • 10 levels of sensitivity.
  • 10 step bar-graph indicator.
  • Intelligent counter for traffic entry, exit and algebraic sum.
  • Piezoelectric beeper for indication of metal.
  • Walk and Stop indicators to regulate traffic.
  • Detects all metals, alloys and ferrites.
  • Low field strength - no effect on pacemakers & magnetic media.
  • SMPS power supply for use with 90V to 270V.
  • Built in full-function battery backup for over 12 hours.

RTPL – III

RTPL– III is a reliable single piece walk-through metal detector system that does not require a separate control unit. It has been developed to detect clandestine ferrous and non-ferrous metals on the body of a person when asked to pass through the doorframe. It is also equipped with an intelligent 5 digit back-lit LCD counter to indicate the in, out and algebraic sum of the traffic going through the door frame. It has been designed for fast installation and operation under all environments. Long life LED Walk/Stop indicators are incorporated on top of the doorframe to regulate the flow of traffic. All controls and audio / visual alarms such as Piezo transducer, LED bar graph, indicator lamps and sensitivity controls are provided at the rear top of the door.

    Features:

  • Automatic zero adjustment.
  • Quick installation – no training required.
  • Ignores external metals.
  • 10 levels of sensitivity.
  • 10 step bar-graph indicator.
  • Intelligent counter for traffic entry, exit and algebraic sum.
  • Piezoelectric beeper for indication of metal.
  • Walk and Stop indicators to regulate traffic.
  • Detects all metals, alloys and ferrites.
  • Low field strength - no effect on pacemakers & magnetic media.
  • SMPS power supply for use with 90V to 270V.
  • Built in full-function battery backup for over 12 hours.

Weapon Scanner

The WEAPON SCANNER is a high sensitivity device designed to detect magnetic and non-magnetic metal masses. The unit can be used to detect weapons, detonators and other small pieces of metal concealed in baggage or correspondence. WEAPON SCANNER'S high sensitivity allows a search to be non-intrusive and hands-off by minimizing physical contact with the subject. The lightweight construction, comfortable grip, large screening area, fast detection circuitry all contribute to higher efficiency screening and reduce operator fatigue. Optimum efficiency on a range of applications is achieved through user adjustable sensitivity.

    Features:

  • Ultra Low power consumption.
  • For fast weapon screening and theft prevention.
  • Highly sensitive scanning circuit - fast scan rate.
  • Instant response - clear visual and audio alarms.
  • Detects all metals, alloys and ferrites.
  • Extra Large coil for wide coverage.
  • No false alarms - digital go–no go threshold circuit.
  • High sensitivity for non-intrusive body searching.
  • Elegantly styled molded ABS housing.
  • Red, Blue and Amber 3 LED status indicators.
  • Low field strength - no effect on pacemakers & magnetic media.

Ultrascan

ULTRASCAN Optimum efficiency on a range of applications is achieved through user adjustable sensitivity. UltraScan's high sensitivity allows a search to be non-intrusive and hands-off by minimizing physical contact with the subject. The lightweight construction, comfortable grip, large screening area, fast detection circuitry all contribute to higher efficiency screening and reduce operator fatigue.

    Features:

  • For fast weapon screening and theft prevention.
  • Highly sensitive scanning circuit - fast scan rate.
  • Detects all metals, alloys and ferrites.
  • Instant response - clear visual and audio alarms.
  • No false alarms - digital go, no-go threshold circuit.
  • High sensitivity for non-intrusive body searching.
  • Ergonomically designed - reduces operator fatigue.
  • Elegantly styled molded ABS housing.
  • Three state, daylight-visible, Blue LED alarm & status indicator.
  • Works on 9V rechargeable battery.
  • Highly reliable SMPS charger works from 90-270V.

Model 7095

DEEP SEARCH METAL DETECTOR MODEL 7095 is based on the internationally proven principle of pulse induction for high reliability and operational simplicity. It is suitable for detection of underground ferrous and Non-ferrous metals such as Copper, Brass, Silver and Aluminum. It can be usefully applied to military,police, engineering, mine, coin searching and treasure hunting. It is ideal for locating buried pipelines, electrical conduits and metal reinforcements. It may be used effectively in mine clearance. The sensitivity does not decrease in case the metal to be detected is submerged in water. The co-axial. 3-coil, search probe has a diameter of 30 cm. It is rugged in construction and capable of withstanding small impacts.

    Features:

  • Highly sensitive, light weight and simple to operate.
  • Reliable pulse-induction technology.
  • Fast and accurate location of buried metals.
  • Sensitivity control for locating metals of all sizes.
  • Auto calibration - Does not require zero adjustment.
  • Long lasting Piezo-electric internal transducer.
  • Headphone is also provided to exclude external noise.
  • Search probe is mounted on aluminum 3-section adjustable telescopic rod.
  • Pitch of sound is directly proportional to size and proximity of metal.
  • Re-chargeable Ni/Cad batteries with built-in SMPS charger.

Deepseeker

DEEPSEEKER is a professional buried metal detector with unique features to cope with all situations and requirements. It can be easily adapted for detection of all kinds of buried ferrous and non-ferrous metals such as copper, brass, gold, silver and aluminum. Detection sensitivity may be suitably adjusted to detect metal from small pins in land mines to buried metal masses like pipelines, bomb shells and weapon caches. DEEPSEEKER is based on the Pulse Induction principle which guarantees extreme detection depths even in soil with high contents of iron oxides or conducting saltwater. Rugged construction enables its use in any terrain and weather.

    Features:

  • Light weight, rugged and professional design.
  • Easy to use with minimum training required.
  • Microprocessor based high speed pulse induction technology.
  • Superior detection depth for minimum metal targets.
  • Automatic threshold and zero adjustment.
  • Dual-Line Back-lit LCD/LED Display for annunciations.
  • Dynamic detection circuitry automatically adjusts to ambient environment.
  • Automatic continuous self-check functions for operational and fault conditions.
  • Continuously variable alarm pitch to indicate the size and proximity of metal.
  • Dual VCO audio to pinpoint the target location accurately.
  • Bar-graph display for visually pin pointing of metal.
  • Concentric coil system mounted on 3-section extendable telescopic pole.
  • Works on both internal long life rechargeable battery and disposable cells.
  • Soft bag, strong transport case and stick probe as optional accessories.

Model MBD1

Mail bomb detector model MBD1 is a microcontroller based system that will reliably screen all your mail and courier deliveries up to telephone directory size (2.25" thick). It will detect virtually all known letter bomb detonating devices regardless of the type of explosive used. Letters and parcels are passed through a chute and analyzed for the presence of explosive materials, electrical triggering devices or any other metal elements used in the construction of a letter bomb. When the machine's magnetic field is disturbed by the presence of a threatening device, MBD1 alerts you with your choice of a silent alarm or a discreet tone alarm which produces a shrill noise.

    Features:

  • Analog signal processing and annunciation.
  • Screens packets up to telephone directory size( 2.25” thick).
  • Detects detonating devices regardless of type of explosive.
  • Detects, knives, weapons, and small metal objects in mail.
  • Ignores regular stationary items such as paper clips, staples and metal tags.
  • Automatically triggers an alarm on packets containing detonating devices.
  • Visual and audio alarm and no calibration required.
  • A test card allows the user to check the unit for correct functioning.
  • Completely safe for use with camera film and magnetic media.
  • Operates from 90 to 270 Volts AC.
  • Integral battery back-up with built in charger.

ELECTRIC FENCE

Raybotix is an Authorized Distributor for Nemtek Electric Fence Products, Nemtek, a South African company that has over 20+ years of experience in the Electric fence industry. We sell, service and support the complete range from Nemtek, Our specialized team is trained to help installers effectively set up fences in compliance with the globally accepted laws and regulations. Having grown from South Africa, Nemtek have evolved into world leaders in the Electric Fence industry and are the largest manufacturer of energizers.

As per security and area of application, we provide various effective solutions which can be understand by below-

*Residential Electric Fence-
Nemtek products are trusted by many homeowners as the product of choice to secure their private properties, housing estates and villages.

*Commercial Security Fence-

Nemtek has identified this need for secure perimeter protection combined with aesthetically pleasing designs that do not compromise on the effectiveness of the security.

*High Security Electric Fence-

Nemtek manufactures all its products with high security in mind but certain sites require different types of high security solutions, which comes under High Security Electric Fence.

*Animal Control Fence-

Extensive range of quality and innovative Animal Management electric fencing solutions help to ensure the safety and wellbeing of your animals.

AN ELECTRIC FENCE IS A BARRIER THAT USES ELECTRIC SHOCKS TO PREVENT INTRUSION ACTIVITY AT YOUR PREMISES

A high voltage shock combined with a physical barrier will deter anyone from attempting to penetrate the perimeter fence. The detecting ability of a Nemtek electric fence energizer will give an alarm when the perimeter of the property being protected has been infiltrated. By keeping the perimeter protected using an electric fence, the attempted break in of the protected area is delayed, giving additional time for a reaction team to respond.

    Features:

  • Deterrence: Visual and Physical Intruder deterrent deters anyone from attempting to breach in or out
  • Detection: Detects attempts to breach the perimeter i.e. continuous monitoring 24/7
  • Short, Sharp, Safe Shock up to 9000 volts
  • Economic to run, power consumption less than 40w bulb

REASON FOR NEMTEK SECURITY E-FENCE

Nemtek is a leading supplier of innovative electric fencing products. Nemtek is respected globally, chosen by many governments, local authorities and industries as the product of choice to protect their utilities, correctional facilities and defense infrastructures. Nemtek manufacture and supply a full spectrum of energizers and fencing hardware for applications in agricultural animal management, as well as industrial, commercial and residential security fencing. With over twenty-five years of experience in designing and manufacturing electric fencing products and technologies, Nemtek has the knowledge and expertise to provide you with the best solutions to meet your requirements. Nemtek protect what is important to you so that you can rest easy.

  • Augment the perimeter security levels and to ensure substantial savings in costs and recurring expenses.
  • Detect and delay militant, terrorist, or determined intrusion.
  • Detect, delay, deter and deny entry to casual intruders – both man and animal.
  • Reduction in Manpower security.
  • Animal control in areas where they are a threat to aircraft taking off or landing.
  • Animal (like bears, elephant, rhino etc.) control in areas where they are a common threat.
  • Prevention of encroachment in civil areas and cantonments.
  • Prevention of vandalism and theft, Protecting residential sites at key and remote locations.
  • Accident or incident protections in areas like ammunition dumps.
  • Access control in sensitive areas Augment the perimeter security levels and to ensure substantial savings in costs and recurring expenses.

Wall Top Electric Fence:

The electric fence which is installed on the top of the wall.

    Poles can be of below manner as per requirement:

  • Straight.
  • Angular.
  • Round Bar.
  • Square Tube.

Electric fence should not be installed on top of wall if the wall is lower than 1.5m.

Free Standing Electric Fence:

When there is no wall for fixing fence post then free stand configuration for electric fence is used. In this type of configuration fence post are grouted in the ground. A free stand fence is generally of 2.4m height from the ground level and runs parallel to chain mesh passive fence.

  • The height of fence can be customized as per requirement.
  • This type of configuration is mostly used in Farms for Animal control.

Residential Electric Fence

RTPL revolutionary designs in security electric fencing have made its product range a trusted household name. RTPL products are trusted by many homeowners as the product of choice to secure their private properties, housing estates and villages.

The cost-effective, reliable and effective designs have been RTPL focus over the past twenty years. A dynamic design team develops new and existing products to better secure your family and friends. The continually evolving RTPL range offers innovative solutions for many residential applications, with many choices to ensure that the right product is available to make homes secure without compromising on aesthetics. The large range of wall top brackets and posts have made it easy to secure most walls offering a range of effective security solutions.

Generally 6 lines and 11 lines configuration with height above wall 0.6m and 1.1m above wall respectively are used for wall top electric fence in residential security. Although number of lines and height of fence can be customized as per requirement.

    Features:

  • Detect, Deter and Delay the intrusion.
  • Cost effective.
  • Durable and robust.
  • Advance warning technology.

Commercial Security Fence

Car and boat showrooms and yards, caravan and motor home displays and outdoor showrooms have not been ignored by criminals and are often also a soft target for vandals. RTPL has identified this need for secure perimeter protection combined with aesthetically pleasing designs that do not compromise on the effectiveness of the security. Modulus brackets and post systems are just some of the trusted solutions where the security electric fencing products look good yet work effectively.

    Features:

  • Secure the properties.
  • Monitor and control the fence remotely.
  • Electric shock with visual and audible alert.
  • Numbers of configurations are available as per requirement.
  • Perimeter can be divided into various zones to enhance the detection capability of fence.

High Security Electric Fence

RTPL manufactures all its products with high security in mind but certain sites require different types of high security solutions. The number of electric fencing zones and the number of fence wires can be increased. Heavier wires and brackets are a common need for high security sites. These sites include prisons, airports, naval bases, border fences, embassies, mints and money distribution points. The need for integration with other technologies such as cameras is common and RTPL offers an integration solution for this. Remote access to the sites is also usually a requirement. Our vast experience in these types of sites in many different parts of the world has made RTPL a trusted source for products and knowledge to address most high security needs.

Entire fence which can be divided into number of zones can be monitored and controlled remotely by using software which enhances the operability of perimeter security. Also when required then the system can be integrated with other sensors used for perimeter security.

    Features:

  • Detect, Deter and Delay the intrusion.
  • Cost effective.
  • Durable and robust.
  • Advance warning technology.

Animal Control Fence

RTPL extensive range of quality and innovative Animal Management electric fencing solutions help to ensure the safety and wellbeing of your animals. We can provide solutions to cater for most farm types, be it stud and cattle or sheep or goat, and farm sizes, from small lifestyle blocks through to larger stations. Our range of products are robustly designed and manufactured from top quality materials to ensure longevity and peak performance. Used for Agriculture purpose to protect crops or yield from animals or to stop the movement of animals to specific premises. A free stand fence starts from ground to the required height depends on area of application that what kind of animals we need to control.

    Features:

  • Detect, Deter and Delay the intrusion.
  • Cost effective.
  • Durable and robust.
  • Advance warning technology.

DRUID 13

The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT) pioneered by Nemtek, these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximizes the power on the fence and minimizes false alarms.

    Features:

  • 3 Joule output energy (single zone).
  • Robust and flexible design for home security.
  • Built-in alarm monitors tampering or faults on the high voltage and earth fence wires.
  • Connectable to armed response radio or GSM module.
  • Lightning and power surge protection.
  • Intelligent power saving to extend battery life.
  • Easy-to-use tag included for controlling the energizer.
  • Walk test mode for easy fence testing.
  • The LCD background color changes to easily identify the fence condition.
  • Powered by 240V mains and includes built-in battery for back-up power.
  • Built-in gate alarm input to monitor if the gate is open or closed.
  • Optional keypad for controlling and programming the energizer. This allows the user to control the energizer remotely, with up to two keypads.

Druid 28

DRUID 28 The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT) pioneered by Nemtek, these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximizes the power on the fence and minimizes false alarms. Synchronization between energizers can be achieved by using traditional network cabling or by the Druid synchronization modules which use orbiting satellites and eliminate the need for cabling between the energizers..

    Features:

  • Two 3.7 Joule independently monitored and controlled zones.
  • The robust and flexible design is ideal for commercial, industrial and high-security sites.
  • Each zone can be set independently to be on/off or in high/low voltage modes.
  • Can be programmed into alarm sensor mode allowing it to be integrated into a separate burglar alarm system.
  • Four zones can easily be created by linking two Druid 28LCD energizers together using the Druid four-zone keypad.
  • Built-in alarm monitors tampering or faults on the high voltage and earth fence wires.
  • Connectable to armed response radio or GSM module.
  • Lightning and power surge protection.
  • Intelligent power saving to extend battery life.
  • Built-in gate alarm input to monitor if the gate is open or closed.
  • Optional keypad for controlling and programming the energizer. This allows the user to control the energizer remotely, with up to two keypads.
  • The relay expansion card can be used to increase the number of information outputs from the energizer.
  • Walk test mode for easy fence testing.
  • The LCD background color changes to easily identify the fence condition.

Agri 0.5J

The Agri. 5 km energizers can be powered with a battery or by mains, making them handy and adaptable depending on your needs.

    Features:

  • Powers up to 5 km of fence (optimal conditions).
  • Robust weather resistant system.
  • Battery charge state indicator.
  • Energizer overload indicator.
  • Day/night sensor.
  • Powered by battery or mains power adaptor (both sold separately).
  • Adaptable mounting options (wall, fence wire or wooden post).
  • Lightning protection.
  • Many programmable options via the LCD handheld remote – (optional accessory) including adjustment of fence voltage and pulse rate, independent day/night setting, battery voltage reporting and fence performance monitoring.

    Specification:

  • Output energy max 0.5 J (stored energy 0.8 J)
  • Power source: Battery 12 Vdc, Battery and solar or an external power supply 220 AC to 12 Vdc
  • Weather proof housing : IP 65
  • Dimensions: H190 X W115 X D76mm

Agri 2J

The Agri. 20 km energizers can be powered with a battery or by mains, making them handy and adaptable depending on your needs..

    Features:

  • Powers up to 20 km of fence (optimal conditions).
  • Robust weather resistant system.
  • Battery charge state indicator.
  • Energizer overload indicator.
  • Day/night sensor.
  • Powered by battery or mains power adaptor (both sold separately).
  • Adaptable mounting options (wall, fence wire or wooden post).
  • Lightning protection.
  • Many programmable options via the LCD handheld remote – (optional accessory) including adjustment of fence voltage and pulse rate, independent day/night setting, battery voltage reporting and fence performance monitoring.

Druid Single Zone Keypad

The Druid energizer can also be controlled and programmed with the optional LED single-zone keypad. The energizer can be installed near the fence and the keypad can be located where it is most convenient for the user..

    Features:

  • Up to two keypads can be connected to one energizer.
  • The fence voltage outputs can be adjusted using the keypad.
  • The siren and gate outputs can be bypassed using the keypad.

    Specification:

  • Size: L130mm X 105mm X H30mm.
  • Weight: 180grams.
  • Supply: 12V (from the energiser).

Druid Two Zone Keypad

The Druid energizer can also be controlled and programmed with the optional LED two-zone keypad. The energizer can be installed near the fence and the keypad can be located where it is most convenient for the user..

    Features:

  • Up to two keypads can be connected to one energizer.
  • The fence voltage outputs can be adjusted using the keypad.
  • The siren and gate outputs can be bypassed using the keypad.
  • The two-zone keypad can be used with any of these energizer models: D25LCD, D28LCD.

    Specification:

  • Size: L130mm X 105mm X H30mm.
  • Weight: 180grams.
  • Supply: 12V (from the energiser).

Druid Four Zone Keypad

Two Druid two-zone energizers can be controlled and programmed with the optional LED four-zone keypad to form a four-zone system. The energizers can be installed near the fence and the keypad can be located where it is most convenient for the user.

    Features:

  • Up to two keypads can be connected to one energizer.
  • The fence voltage outputs can be adjusted using the keypad.
  • The siren and gate outputs can be bypassed using the keypad.
  • The four-zone keypad can be used with any of these energizer models: D25LCD, D28LCD.

    Specification:

  • Size: L130mm X 105mm X H30mm.
  • Weight: 180grams.
  • Supply: 12V (from the energiser).
  • Cable requirements: 3 core alarm cable.

Omega Post

This Omega bracket is used when there is a corner, change of direction or an end post. The Omega system utilises the mechanical strength of an existing fence to reduce the cost of constructing a complete new system.

    Features:

  • Robust design for ends and corner tensioning.
  • Easy to transport reducing handling time and transport costs.
  • Holes every 100 mm to accommodated and secure the S-hooks, 90 degree hooks,180 degree hooks, or the pull through assemblies. (Also available in 90 mm).
  • Hooks are used in conjunction with the wire tensioners, strain insulators and springs to tension the electric fence wires.
  • Can be configured and installed in various ways.

    Specification:

  • Finish: Hot dip galvanised.
  • Hole spacing: 100 mm.

Square Tube Bracket

Nemtek brackets are made to a high standard to maximise security and ensure long life in the field. The level of security achieved is directly affected by the choice of bracket, the number of wires forming the electrical barrier and the distance between the brackets. Nemtek offers a large range of brackets to suit most wall types and applications. They are made from steel and are finished in a high quality outdoor powder coating, or are hot-dip galvanised for coastal conditions. Our factory can manufacture different types of designs and finishes on request.

    Features:

  • 20mm x 20mm square tube.
  • Straight and angled.
  • Multiple wire options.
  • Hot dip galvanised.
  • Associated insulator: Jurassic insulator slotted.

    Specification:

  • Material: 20mm X 20mm.
  • Finish: Hot dip galvanised.

Strain post

The strainer posts can be used as corners or as corner and end straining posts in free-standing electric fences. The round posts are concreted into the ground and secured by 2 stays at 90 degree angles for corner applications. The round posts only require one stay in the direction of the wire tension in an end post application.

The round post are supplied with holes every 100mm to fit the Nemtek hot dip galvanised through hole hooks. These hooks are used in conjunction with the wire tensioners, strain insulators and springs to secure the electric fence wire and keep these wire under tension.

  • 20 wire, 2.0 meter high fence. (2.4 meter in total length). 
  • 24 wire, 2.4 meter high fence. (3.0 meter in total length).

Jurassic Insulator

The Jurassic insulator is used with square or round tube fencing brackets..

    Features:

  • Large electrical tracking distance to reduce arcing in areas where there is pollution and salt buildup.
  • Feed through option to thread the wire for maximum security.
  • Slotted clip option available for a quicker wire placement.
  • Jurassic fasteners are available in to sizes for different size tubing.

Omega Insulator

The Omega insulators are designed to be used with the Nemtek Omega range of posts.

    Features:

  • Heavy duty design.
  • Large location plates allow for increased tolerance.
  • Double tracking shield to reduce tracking and arcing.
  • Quick fit design.
  • Easy to replace when required.

    Specification:

  • UV stabilised HDPE.
  • Operating temperature: -40 to 80 Celsius.
  • Operating volatge: 0 -12KV.

Strain Post Insulator

Nemtek strain insulators are used at the begining or at the end of an electric fence wire run. The strain insulator - Ultra is suitable for fence wire diameters up to 2.5 mm and a working load of 40 kgs. The strain insulator Ultra hardened is sutable for wire diameter of 3 mm and a working load of 140 kgs. The strainer insulator - Ultra is available in black or white and the Ultra hardened in black only. Only virgin materials are used in their manufacture which are designed for a long life. They allow for larger creepage distance to reduce power loss.

    Specification:

  • Virgin plastics: UV stabilised for external use.
  • Colours: Black and white and only black for the Ultra hardend.
  • Working max load: 40 kgs for the Ultra.
  • 140 kgs for the Ultra hardend.

Nail on Insulator

The nail on insulators can screwed or bolted onto metal brackets or wooden posts.

    Features:

  • Large wire clips for heavy duty applications.
  • Larger clearance to eliminate power leakage.

    Specification:

  • Material: UV stabilised.
  • Colour option: Black and white.

Hybrid Nylon Tensioner

This compression spring hybrid tensioners combines a compression spring and a tensioner all in one. The compression spring will maintain the tension of the fence wire and the ratchet tensioner can be used to increase the tension as and when required over time..

    Features:

  • Heavy duty durable design.
  • Combination of a compression spring and tensioner.
  • Plastic inner which eliminates galvanic reaction.
  • Stainless steel spring for long life 5kg tension.
  • Wire diameters from 1mm to 1.2mm.

    Specification:

  • Material: Stainless steel and UV stabilised nylon inner.
  • Operating temperature: -40 to 80 Celsius.
  • Operating voltage: 0- 12KV.

Big Boy Tensioner

The heavy duty nylon tensioner is a tension system and an insulator all in one..

    Features:

  • A hardy heavy duty tensioner for all weather types.
  • Can tension from a 1.2mm wire up to a 2.5mm wire, making it very versatile.
  • Recommended tensioning up to 70kg.
  • It eliminates galvanic reaction between dissimilar metal thus eliminating rust and can be used with any type of wire.

    Specification:

  • Material: UV stabilised glass filled nylon.
  • Tension maximum: 70kg.
  • Operating temperature: -40 to 80Celsius.
  • Operating voltage: 0- 12KV.
  • Recycling: SPI resin code 7.

Compression Spring Heavy Duty

The Nemtek compression springs heavy tension (15kg) is used to maintain a constant tension on the electric fence wires. Wire tension on an electric fence will vary over time and the springs will maintain a constant force on the electric fence wires to keep them neat..

    Features:

  • A nylon plastic inner which eliminates galvanic reaction between dissimilar metal thus reducing rust and increasing the life of the wire.
  • Can be used with any type of Nemtek electric fence wire.
  • The heavy tension compression springs (15kg) can tension wires from 1.6mm up to 2.5mm.

    Specification:

  • Material: Stainless steel and UV stabilised nylon inner.
  • Spring tension maximum: 15kg.
  • Operating temperature: -40 to 80Celsius.

STRANDED GALVANIZED WIRE

Stranded galvanised steel is high tensile and hard to cut. The flexibility offered by the stranded wire construction makes working with this wire easier during installation and results in a neat clean look on the fence without compromising the fences performance

    Feature:

  • Easy to work with stranded wires.
  • Ideal choice for in-land use where corrosion is low.
  • High in tensile strength which us harder to cut.

    Specifications:

  • Material: Galvanised 1.6mm.
  • Construction: Stranded.

SOLID GALVANIZED WIRE

Solid galvanised wires are mainly for used for high tensile electric fencing system as they are ideal to long runs. High strength mechanical fence are ideal for keep larger farm or game animals..

    Feature:

  • Heavy duty high tensile strength.
  • Long life expectancy on a fence.
  • Larger diameters offer lower electrical resistance.

    Specifications:

  • Material: High tensile galvanized mild steel

HT CABLE

The high voltage cable is used as a lead out cable from your energizer to the fence and for all other insulated high voltage transmissions. These high voltage cables can be used with all the Nemtek galvanised wires. They are available in single core or multi core contraction.

    Feature:

  • Slimline designed for ease of installation and an aesthetically pleasing look.
  • Cable is made up of tinned copper stranded wires for more flexible and ease of use.

FERRULES

The ferrules are used to join and electrically connect cables and wires permanently.This is a high security wire connection because it cannot be removed.

    They Are Available In:

  • Tinned copper
  • Can be used up to 2mm wire.

LINE CLAMP

The fence light is installed between the earth and live wire to indicate the status and condition of The line clamps are used to join and electrically connect cables, wires and poly ropes. The line clamp ensures that a good electrical connection is maintained between the joints so that the electric fence functions correctly.

    Features:

  • Can connect wire diameters from 1.6mm to a 3mm.
  • Can connect 6mm poly ropes and high tension (HT) lead out cables.

Specifications

  • Finish: Galvanised for long life.
  • Size: 8mm.

LARGE TAIL HOOK

The large tail hooks are a quick fit hook system for the Nemtek flat and round bar insulators.

    Features:

  • Stainless steel finish for long life expectancy.
  • Large tail to fit the Nemtek range of tension devices.
  • Fits easily and quickly onto the Nemtek round and flat bar insulators.

Specification:

  • Material: Stainless steel

S HOOK

The S-Hook is used to hook the different wire tensioners, heavy duty springs and strainer insulators to the Omega posts or the angled and round corner posts.

Specification:

  • Finish: Hot dip galvanised

FENCE LIGHT

The fence light is installed between the earth and live wire to indicate the status and condition of the fence for peace of mind.

    Features:

  • Fence light galvanised wire for inland us.
  • Fence light stainless steel wire for coastal use.
  • Easy to installed between any earth and live wires.

Specifications

  • Material: Plastic and water tight compound

GATE CONTACT

The heavy duty sliding gate contact is used for series wiring of sliding gates with a robust construction using stainless steel and brass, making it suitable for outdoor use in most climates. The large location plates allow for increased tolerance and easier installation..

    Features:

  • Heavy duty design
  • Large location plates allow for increased tolerance
  • Available with brass cable connectors (SGC13) or crimp lug connectors (SGC07)

Specifications

  • Material: UV stabilised Nylon  Stainless steel and brass

DRUID RS.485 COMMS CARD

Used for communication and synchronisation of the Druid D25LCD or D28LCD energizers over a star or daisy chain RS485 network.

    Features:

  • RS485 communication card.
  • Fits inside the Druid D25 and D28 energizer housing.
  • For communication and synchronisation of the Druid D25LCD or D28LCD energizers over a star or daisy chain RS485 network.

    Specifications

  • Size: L110mm x W110mm x H20mm.
  • Weight: 160g.
  • Power supply: 10V – 15V DC.

NEMLINK CARD - TCP/IP CARD

The Nemlink cards provide a convenient ethernet interface for the Druid two-zone energizers and the Druid FG controller to be distributed over standard TCP/IP ethernet networks.

    Features:

  • Compatible with the Druid two-zone energizers and Druid FG7 controller.
  • Fits inside the Druid two-zone energizer enclosure.
  • Provides electrical isolation between devices on the network.
  • Enables the use of existing IP Network infrastructure, saving wiring time and costs.

    Specifications

  • Size: L140mm x W55mm x H20mm.
  • Weight: 45g.
  • Power supply: 10V – 15V DC.
  • Current consumption: 80mA.
  • Connector: RJ45.

DRUID SYNCHRONIZATION MODULE

Synchronisation between energizers has traditionally been done by physically connecting the energizers through wiring. The groundbreaking Nemtek synchronisation module synchronises the energizers using satellites, this eliminates the need for wiring between energizers, saving on costs and making the installation quicker and easier..

    Features:

  • Easy to install and ready to use.
  • Watertight housing for external installation.

    Specifications

  • Weight: 105g.
  • Power supply: 10V – 15V DC.
  • Current consumption: 50mA.
  • IP rating: IP65.

DRUID 10 RELAY EXPANSION CARD

The Druid 10 relay expansion card can be used to increase the number of information inputs and outputs from the Druid 25 LCD (E-DRUID/25/LCD) or Druid 28 LCD (E-DRUID/28/LCD) energizers. It can be installed in the energizer housing. It has four inputs which can be used to switch the individual zones on/off and to switch between high and low voltage for each zone. The relay 10 contacts can be configured to be potential-free, independent, dry contacts, or set to wet contacts with a common ground and a nominal 12V output.

    Features:

  • 4 digital inputs.
  • 10 relay outputs.
  • Robust surge protection is included on all inputs and outputs.
  • All relays can be individually configured to be independent dry contacts or common-ground wet contacts with 12V nominal output.
  • 3 Programmed setting to choose from.

    Specifications

  • Size: L180mm x W112mm x H22mm
  • Weight: ~260g
  • Power supply: 10V – 15V DC

DRUID NETWORK IO CARD

The IO card is typically used as an interface between a network containing an FG7 (FG-DRUID), Druid 25 LCD (E-DRUID/25/LCD) or Druid 28 LCD (E-DRUID/28/LCD) energizer, and third-party systems, but is a general input-output device. The 8-way network IO card provides 8 digital inputs linked together via common ground and 8 user relays plus 1 communications good relay, each with normally open and normally closed contacts. The relay contacts can be configured to be potential-free, independent, dry contacts, or set to wet contacts with a common ground and a nominal 12V output.

    Specifications

  • Size: L180mm x W112mm x H22mm
  • Weight: ~250g
  • Power supply: 10V – 15V DC

    Features:

  • 8 digital inputs.
  • 8 plus 1 relay outputs (8 user relays + 1 valid comms relay).
  • Robust surge protection is included on all inputs and outputs.
  • All relays can be individually configured to be independent dry contacts or common-ground wet contacts with 12V nominal output.
  • Each relay has a very useful LED indicator to show if the relay is energized.
  • 3 communications debug LED indicators for TX, RX and VALID COMMAND.
  • 1 power-on LED indicator.
  • In addition to the input states, the IO card also reports back temperature and supply voltage level.
  • Up to 31 unique addresses can be set using on-card jumpers.
  • Available with ethernet (EE-FGIO8/NL) or RS485 (EE-FGIO8/485) interface options.

NETWORK SWITCH

The OP-MEN 99810 is a GbE managed switch, it supports 8-Port GbE copper with RJ45 and 2- Port GbE fiber with SFP, and supports redundant power circuitry. The main power inlet is 100~240VAC, the alternate power is a 12VDC battery; the battery is connected on DC terminal block connector. When AC input power is good, the OP-MEN 99810 provides 15VDC output to charge the connected on DC terminal block battery. When AC input power failed, the 12VDC battery will be an alternate power to provide 12VDC power

Fence Probe Software

Nemtek Druid fence probe software provides a PC based visual interaction with your electric fence system. Visual map images of the electric fence and its zones can be displayed on a computer screen. This software enables a site to be controlled from a remote location. A programmable timer function can control water pumps, lights and other remote functions using the Druid network IO card. Logs record the operational history of the system over time

    Features:

  • Nemtek Druid Fence Probe software provides computer interaction with one FG7 controller, 32 two-zone Druid LCD energizers and up to 31 Druid network IO cards.
  • Visual map images of the electric fence and its zones can be displayed on a computer screen. This software enables a site to be controlled from a remote location.
  • A programmable timer function can control water pumps, lights and other remote functions using the Druid network IO card. Logs record the operational history of the system over time.

FG7C Controller

The Nemtek Druid controller FG7C is a seven-inch LCD touch-screen controller that can be used to control up to 32 Nemtek Druid two-zone energizers . The Nemtek electric-fencing system can also be integrated via a TCP/IP connection between the Nemtek FG7C capacitive touch-screen controller and Nemtek fenceprobe software (E-NDFP01) or a third-party security management system.

    Features:

  • Up to 32 Druid two-zone energizers providing up to 64 zones can be controlled.
  • Graphic image of the site with zones and the fence and energizer conditions can be displayed on the LCD screen.
  • Commands can be sent to the energizers using the touchpad.
  • Logs containing system details are recorded.
  • Allows for three different types of users with different access levels to be set up.
  • Can be configured to allow TCP/IP connectivity for integration with third-party software and systems.
  • For large-scale systems, additional FG7C controllers can be used.

Siren

Audible indicator that alerts you when fence has been tampered with.

    Specifications:

  • 110db output.
  • 12 volt DC supply.

STROBE LIGHT

The strobe lights are a visual indicator of an alarm. They are used to show the status of a fence after an alarm condition offering a visual alarm event memory. A galvanised bracket for the strobe light is also available.

    Specifications:

  • Supply: 12Vdc.

Warning Sign

Warning signs must be placed along the fence line to warn of the existence of an electrified fence. These must be placed at 10m intervals along the fence, at gate ways or whenever there is a change of direction. Wire clips on the warning sign reduce installation time.

    Feature:

  • IEC 60335-2-76 compliant design.
  • Custom versions are available on request.

    Specifications:

  • Material: UV protected for long life

Entrance Automation Products

Entrance automation is the basic need in this modern world for safe pedestrian and vehicular lane. Entrance automation products provide high and fasts security, we provide high grade and attractive entrance automation product for vehicular and pedestrian lane. We are believed in quality and customer satisfaction. A special team full of experienced workers, engineers and a special R&D unit are working 24X7 for smooth and safe entrance automation.

Entrance Automation Systems has carved a strong reputation in the industry of manufacturing and supplying a quality-assured assortment of Automatic Gates and Shutters. Our range of products include Automatic Boom Barriers, Automatic Swing Gate, Turnstiles, Flap Barriers and High Speed Door, among many others. Our products, which are produced with Grade A raw material procured by reliable manufactures and vendors, are extensively demanded in the market for their superior performance, innovative design, low maintenance, user friendly attributes and rust proof body. With stringent quality control parameters in place, our products are manufactured using only latest technology and equipment. We are leading brands from past few years.

Our production units are operating out of a state-of-the-art facility which is backed by a strong R&D unit. Our attractive barrier and Gates are appealing to the eye with their striking designs – made possible by the artistic people in our workforce. Our products go through rigorous quality tests before being made available in the market. We are constantly innovating and trying to improve the quality of our products. With the aid of our large distribution network, we have been able to deliver consignments within stipulated timeframes.

Boom Barrier BB-800

Boom barrier BB-800 offers efficient security at the exit and the entry points of heavy vehicular lane. It is used at factories, ware house, Truck depose etc or any road - way entry where heavy vehicular traffic is expected. Boom barrier are used to effectively regulate pedestrian and vehicular traffic. It is used- to be able to manage security better.

    Features:

  • Designed for Industrial applications & wide lane.
  • Heavy Duty AC motor being used.
  • Max boom length: Up to 8 mtrs.
  • Heavy-duty AC Motor with steel Top and steel housing.
  • Opening & Closing Time. (More than 6Sec for 8Mtrs.).
  • Full MS housing with 2mm thick MS sheet.
  • Protection class: IP55.
  • Electromechanical Technology.
  • Multifunctional Controller.
  • Safety Inputs and relay output.
  • Low Maintenance.

Boom Barrier BB-600

Boom barrier BB-600 fully automatic electro- mechanical barrier, offers efficient security at the exit and the entry points of factories, office complexes, corporate houses, residential Buildings or any road - way entry where medium to heavy traffic is expected. Automatic barrier are used to effectively regulate pedestrian and vehicular traffic. It is used- to be able to manage security better.

    Features:

  • Red & Green LED light on the barrier body.
  • Aluminum Telescopic Boom for 6 meter.
  • Red & Green LED Light boom up to 5 meter.
  • Designed for Industrial and residential applications.
  • Max Boom Length: 6 meters.
  • Operating time 6 sec for 6 meter.
  • High durable AC Motor.
  • Protection class: IP55.
  • Electromechanical Technology.
  • Multifunctional Controller.
  • Safety Inputs and relay output.
  • Low Maintenance.

Boom Barrier BB-500L

Boom barrier BB-500L fully automatic electro- mechanical barrier with fully aluminium housing and attractive LED light on both side also on the top of the barrier. Boom comes along with rubber on the bellow which makes it safe, unique designed and LED makes it attractive on new gen infrastructure. Automatic barrier offer efficient security at the exit and the entry points of factories, office complexes, corporate houses, residential Buildings or any road - way entry where medium to heavy traffic is expected.

    Features:

  • Light on the barrier body and top of the barrier.
  • Aluminum Boom with rubber for 5 meter.
  • Designed for Industrial and residential applications.
  • Max Boom Length: 5 meters.
  • Operating time 6 sec for 5 meter.
  • High durable AC Motor.
  • Protection class: IP55.
  • Electromechanical Technology.
  • Multifunctional Controller.
  • Safety Inputs and relay output.
  • Low Maintenance.

Boom Barrier BB-600 HS

Boom barrier BB-600HS offers high speed at the exit and the entry points of that area which is more busy and fast. It is efficient to manage the traffic like toll plaza and office complex. Automatic barrier are used to effectively regulate pedestrian and vehicular traffic. Control unit have microcontroller which gives external programming features. It is used- to be able to manage security better and smarter.

    Features:

  • Designed for Industrial and residential applications.
  • Max length of Boom: 3 Mtrs.
  • Opening & Closing Time: 1.5 second.
  • Protection class: IP55.
  • Electromechanical Technology.
  • Multifunctional Controller with open close fine tuning setting.
  • Safety Inputs and relay output.
  • Low Maintenance.

Boom Barrier BB-600D

BB-600D boom barrier is designed for continuous use and can easily manage high traffic volumes. It comes with MS galvanized housing with aluminum boom. Even large passage widths can be secured with boom lengths can up to 6 meters. Durability with minimal maintenance means years and millions of trouble free operations. BB-600D comes along with brush less DC motor offers to integrate with battery backup and some of the necessary safety devices like loop detector, photocell, warning flash light.

    Features:

  • Robust housing made of MS powder coated
  • Brushless DC motor with gear support
  • Telescopic aluminum boom length up to 6 mtr
  • Multi function controller
  • 24V battery backup (optional)
  • Adjustable speed 1.5 Sec to 8 Sec 9 DEPEND ON Boom length)
  • Reverse on contact feature
  • Boom fly away on collision feature
  • Smooth operation of boom(jerk & bounce free)
  • 1.5 Seconds for 1-3Mtrs
  • 5.0 Seconds for Up to 6Mtrs
  • Heavy duty electro-mechanical mechanism for intensive use
  • Internal parts made of cast iron making it rigid and long lasting
  • Suitable for Indoor or outdoor applications
  • Lubricated deep grove ball bearing make the barrier smooth and noise free
  • Unique manual control provides fail safety solution in case of emergency or power failure, providing egress in case of crisis evacuations

Loop Detector

The loop detector model has new feature, which allows detection only when a vehicle has come to a complete stop on the loop. This is a major advantage if you want to ignore cross traffic in tight spaces. It comes with single and dual channel which is also be used for auto closing after complete passing of vehicle.

    Features:

  • Single and dual channel.
  • Easy set-up and installation.
  • Easy identification of interference problems.
  • Fits into small operator housings, saving space.
  • sensitivity settings - gives the user the ability to select the best sensitivity level.
  • Durable and accurate in operation.

Photo Cell

The self-aligning photocell is a safety device comprising modulated infrared transmitter and receives. Breaking the path of the beam causes a switch of the electric contact on the receiver which cause the complete open position for boom in running mode or prevent to close the boom in rest mode

    Features:

  • Highly accurate & high sensitive.
  • Need very small space to install.
  • Use for automatic opening the barrier.
  • Safety with close.

Push Buttons

Push buttons is for operate the boom barrier remotely from the 30 meter of distance. It is easily implemented with the simple 4 core coaxial cable.

    Features:

  • It has 3 buttons – open, close and stop.
  • Smooth button with metal housing.
  • Easy to use.
  • Can be installing 50m away from the barrier.

Remote Control

Infra red remote controls are used for open and closing the barrier from 50m of distance without any blockage. It’s providing an extra feature to operate the barrier. Small size can carry easily key Chan for hold the bunch of keys.

    Features:

  • Easy to use.
  • Easy to carry.
  • Long battery life.
  • Open and close with one switch only.

Tripod Turnstile T-305

Tripod Turnstile T-305 fully automatic tripod turnstile suitable for heavy pedestrian traffic powered by DC motor, LED direction indication with inbuilt entry exit counter and Lane indication. can be easily to integrate with other read/write devices and systems, can fulfill functions like entrance control, time attendance, pedestrian volume control etc. It is widely used for applications like stadium, apartment, gym, museum, station, library and factory etc.

    Features:

  • Effective entrance control solution.
  • Space efficient compact design.
  • 304 stainless steel housing.
  • Protection class-IP 44.
  • Operating Modes: Unidirectional / Bidirectional/ Free Passage/ Always locked.
  • Automatic drop arm feature during emergency.
  • Compatible with 3rd party access control systems.
  • Can be customized for Biometric system.
  • Low maintenance.
  • Pass rate: 35 person /min.

Tripod Turnstile T-304

Tripod Turnstile T-304 is high grade semi automatic tripod turnstile suitable for pedestrian traffic can be easily to integrate with other read/write devices and systems, can fulfill functions like entrance control, time attendance, pedestrian volume control etc. It is widely used for applications like stadium, apartment, gym, museum, station, library and factory etc.

    Features:

  • Designed for Banks/IT Parks /Business Premises/Gym/Metro Stn./Amusement Parks.
  • Cost effective entrance control solution.
  • Space efficient compact design.
  • 304 stainless steel housing.
  • Protection class-IP 44.
  • Operating Modes: Unidirectional / Bidirectional/ Free Passage/ Always locked.
  • Automatic drop arm feature during emergency.
  • Compatible with 3rd party access control systems.
  • Can be customized for Biometric system.
  • Low maintenance.
  • Pass rate: 35 person /min.

Turnstile Full Height

The full-high turnstile is designed to provide unsupervised access control for office or building. The impenetrable construction eliminates any unauthorized access to restricted areas. To gain authorized passage through the turnstile, the user must present a valid card for the access control system. Upon presentation of the valid card. The turnstile will unlock and allow the user to pass through the direction requested. The turnstile can also work with push button, fingerprint and various access control system.

    Features:

  • Designed for Industrial applications like Defence Installations/High security zone/Banks.
  • Solid design and construction for outdoor use at high-risk sites with large flows of people.
  • Ensures high security level with unattended operation.
  • Available in 304 SS grade.
  • Protection class-IP 44.
  • With Bi-directional feature.
  • Compatible with 3rd party access control systems.
  • Can be customized for Biometric system.
  • Low maintenance.
  • Unlock time: 0.2s.
  • Pass rate: 35 person /min.

FB 310S

Flap barrier310S are designed to control pedestrian entering and exiting, adopts stainless steel 304, double brushed surface treatment, dust-proof, rustproof with IP44 weather protection suitable for indoor and outdoor use, easy to integrate with other read/write devices, and widely use for applications like stadium, apartment, gym, museum, station, library and factory etc. High grade electronics and rust free heavy duty mechanism makes it durable and long lasting.

    Features:

  • Designed for elegant entrance for public and commercial buildings.
  • Seamless design and durable quality.
  • Compatible with 3rd party access control systems.
  • Low maintenance.
  • Pass rate: 35 person/min.
  • Infrared protection.
  • 304 stainless steel housing.
  • Trespassing infrared alarm.
  • Protection Class-IP 44.

FB 311

The FB-311 Flap barrier space efficient security barrier with compact design yet offers sufficient space to integrate and access control system. They can be mounted with display, passage counter, card reader, token operation, traffic lights, command console; alarm system etc. housing made up of SS-304 powered by dc motor makes it smarter smooth and long lasting.

    Features:

  • Designed for high security pedestrian areas.
  • Attractive design and lightning makes it attractive.
  • Compatible with 3rd party access control systems.
  • Can be customized for Biometric system.
  • Low maintenance.
  • Pass rate: 35 person/min.
  • Infrared protection.
  • 304 stainless steel housing.
  • Tailgating infrared alarm.
  • Protection Class-IP 44.

FB 314

The FB-314 Flap barrier space efficient security barrier with modular housing yet offers sufficient space to integrate and access control system. They can be mounted with display, passage counter, card reader, token operation, traffic lights, command console; alarm system etc. housing made up of SS-304 powered by dc motor makes it smarter smooth and long lasting.

    Features:

  • Designed for automatic traffic pedestrian areas.
  • Small housing with high security.
  • Compatible with 3rd party access control systems.
  • Can be customized for Biometric system.
  • Low maintenance.
  • Pass rate: 35 person/min.
  • Infrared protection.
  • 304 stainless steel housing.
  • Tailgating infrared alarm.
  • Protection Class-IP 44.

Swing Barrier

Swing barrier SB-312B is designed to control pedestrian entering and exiting, adopts stainless steel 304, double brushed surface treatment, dust-proof, rustproof design, suitable for indoor and outdoor use, easy to integrate with other read/write devices, and widely use for applications like stadium, apartment, gym, museum, station, library and factory etc.

    Features:

  • Designed for elegant entrance for public and commercial buildings.
  • Glass finish makes it look very elegant to elevate aesthetics of building lobby.
  • Suitable for Outdoor and Indoor applications.
  • Compatible with 3rd party access control systems.
  • Can be customized for Biometric system.
  • Low maintenance.
  • Unlock time: 0.2s.
  • Pass rate: 35 person/min.
  • Infrared EKS protection.
  • 304 stainless steel housing.
  • Trespassing infrared alarm.

P Type Swing Gate

P type Swing gate P-308 is an ideal passage access management device which is very useful for handicap lane. This product made of stainless steel 304, integrating with mechanism, electron, microprocessor and various identification technologies, by configuring all kinds of identification devices and adopting reliable safeguard devices, this product is able to achieve access intelligent control and management.

    Features:

  • Designed for manual or handicap lane.
  • Suitable for Outdoor and Indoor applications with wide coverage area.
  • 304 stainless steel housing.
  • Protection class-IP 44.
  • Operating Modes: Unidirectional / Bidirectional/ Free Passage/ Always locked.
  • Compatible with 3rd party access control systems.
  • Can be customized for Biometric system.
  • Low maintenance.
  • Pass rate: 35 person /min.

Speed Gate

Speed gates are elegant entrance security products for public and commercial buildings with a wide range of finishes. Speed gates use proven access control technology compatible with card readers, keypads or biometric systems to ensure that you can integrate a solution which meets your need.

    Features:

  • Ideal entrance control solution where maximum security, a high level of personal comfort and impressive design are essential.
  • Designed for Premium projects with marble finish on the top.
  • Fast operation on sliding technology.
  • Compatible with 3rd party access control systems.
  • Unlock time: 0.2s.
  • Pass rate: 35 person/min.
  • 304 stainless steel housing.
  • Infrared EKS protection.
  • Trespassing infrared alarm.
  • Protection Class-IP 44.

Sliding Gate Operator

The Sliding Gate Operator - SGO-1500/1200/800 models are the first choice for automatic sliding door application. Featuring quality components and backed by years of proven reliability, each unit is carefully inspected and mechanically tested to provide unsurpassed performance. Heavy duty mechanism with powerful AC motor for smooth and maintenance free operations over year..

    Features:

  • Innovative sliding gate operator with low stand-by power consumption.
  • One Touch Easy Programming- The controller learns the Opening and Closing limits automatically.
  • Electronic soft-start - Ensures the motor starts steadily and smoothly.
  • Release key for power failure.
  • Tamperproof operator cover.
  • Intelligent terminals for photocell, alarm, lamp, external receiver, etc.
  • Easy to install and maintain.
  • Designed for Industrial as well residential applications.
  • Suitable for Outdoor applications.
  • Compact with any 3rd party Access Control system.
  • Low maintenance.
  • Prompt local service support and spare availability.
  • Available in different load capacity up to 1.5 tonnes.
  • Electronic Safety Reliable under all conditions.

Tyre Killer

Tyre Killer TK-5000 is electro-mechanicals operated heavy duty spike barrier which rises above the ground level on giving a valid input signal and thus prevents unauthorized intrusions at entry/exit points of high security premises. When the tyre killer is in a lowered position the vehicles can pass through, thereby providing a good enhanced security blockage system. The housing and the blocking element of the Tyre Killer are designed in full core steel profile.

    Features:

  • Q235 steel with powder coated housing.
  • IP-67 Protection.
  • Yellow & Black or can be customized.
  • Size W660 X L3000 X H70-110 mm.
  • Spike Height 15 to 25 c.
  • Min load weight up to 40 tone.
  • Operating time 2 second.
  • Power supply 220 vac, single phase.
  • Control distance up to 1000 meter.
  • Operating through remote, push button Etc.

Road Blocker

RB-4000 is an electro hydraulic high speed road blocker. The whole assembly made up of top quality A3 steel with anti rust paint which is protected from atmospheric intrusion. Internal mechanism made from cast iron which makes it rigid and durable. Micro controller is the main base or it can be say that it's the brain of it and the other electronic components make it smarter, faster and intelligent from the other product. It's basically design for those areas where high speed and high security required.

    Features:

  • Sturdy housing made of high quality A3-steel.
  • Cost effective & pleasing design.
  • Power full hydraulic unit.
  • Suitable for high influx movement.
  • Manual operation for power failure.
  • A3 steel constriction with high quality electronic components.
  • Internal mechanisms are made steel grade metal alloy which make it long lasting.
  • High grade PCB and latest ICS are used in the electronics parts.
  • Micro-controller makes it smarter, faster and better than the other.
  • High pressures lifting solenoid valve used for faster movement.

Bollard

BL-600H is an electro hydraulic high speed Bollard. The whole assembly made up of top quality A3steel with SS-304 pillars with anti rust paint which is protected from atmospheric intrusion. Internal mechanism made from steel which makes it rigid and durable. Micro controller is the main base or it can be say that it's the brain of it and the other electronic components make it smarter, faster and intelligent from the other product. It's basically design for those areas where high speed and high security required..

    Features:

  • Sturdy housing made of high quality A3-steel.
  • Cost effective & pleasing design.
  • Power full hydraulic unit.
  • Suitable for high influx movement.
  • Manual operation for power failure.
  • Heavy duty electro-Hydraulicl mechanism for intensive use.
  • A3 steel material constriction for long life cycle.
  • vane pump oil transmissions mechanism.
  • Unique Manual control provides fail safety solution in case of emergency or power failure.
  • Buffer piston very low noise.

Polescan

Polescan is a single pole solution to detect unauthorized or illegal cell phones, tablets, laptops, smart watches, wearables and weapons including guns, knives etc. Setup is simple and can be done anywhere; plug and play out of the box with less than 30 seconds from powering up to full operation. This allows rapid, non-invasive inspection of pockets, bags, purses, clothing and even body cavities. Detection of all cell phones and ferrous contraband concealed on the person or in body cavities.

    Features:

  • Detects Cellphone & Ferrous Contraband
  • Multizone Detection For Accurate Pinpointing
  • Compact and Light Weight Less Than 10 Kgs
  • Portable Single Pole Type Installation
  • Builtin Battery Backup of Over 12Hrs
  • Weatherproof for Outdoor Use
  • Detects all cell phones and ferromagnetic contraband
  • Automatic self-calibration in all environments
  • Full height, 360 degree detection
  • Functions in vertical and horizontal positions
  • 10 Level volume control for precise volume setting
  • 100 Levels of sensitivity for individual zones
  • Dual level of gain adjustments for each zone
  • User selectable pre-programmed settings for quick calibration
  • High contrast OLED display for information display and settings
  • User adjustable intensity for OLED display and display LEDS to suite the environment
  • Alarm count for number of detections
  • User selectable 8 tones for indication detection with silent mode option

Polescan

POLESCAN is a single pole solution to detect unauthorized or illegal cell phones, tablets, laptops, smart watches, wearables and weapons including guns, knives etc. Setup is simple and can be done anywhere; plug and play out of the box with less than 30 seconds from powering up to full operation. This allows rapid, non-invasive inspection of pockets, bags, purses, clothing and even body cavities. Detection of all cell phones and ferrous contraband concealed on the person or in body cavities.

Features:

  • Detects Cellphone & Ferrous Contraband
  • Multizone Detection For Accurate Pinpointing
  • Compact and Light Weight Less Than 10 Kgs
  • Portable Single Pole Type Installation
  • Builtin Battery Backup of Over 12Hrs
  • Weatherproof for Outdoor Use
  • Detects all cell phones and ferromagnetic contraband
  • Automatic self-calibration in all environments
  • Full height, 360 degree detection
  • Functions in vertical and horizontal positions
  • 10 Level volume control for precise volume setting
  • 100 Levels of sensitivity for individual zones
  • Dual level of gain adjustments for each zone
  • User selectable pre-programmed settings for quick calibration
  • High contrast OLED display for information display and settings
  • User adjustable intensity for OLED display and display LEDS to suite the environment
  • Alarm count for number of detections
  • User selectable 8 tones for indication detection with silent mode option

Search Light

A searchlight with a mirrored reflector to project a powerful beam of light of approximately parallel rays in a particular direction, usually constructed so that it can be swiveled about. We have a variety of product as per required applications and effectiveness.

Super Light–II

SUPER LIGHT-II is a Micro-controller based, high-reliability, rechargeable, cordless lamp capable of illuminating targets at a distance of over 350 meters. It is designed for combat use under the most arduous conditions.

It is equipped with deep focus, sealed beam unit rated at 55 Watts. The bulb is highly resistant to shock and vibration. It has a built in CC/CV SMPS charger to optimally charge the integral and sealed 12V/7AH battery at specified rating.

Features:

  • Brilliant 55 Watt halogen beam.
  • Reliable microcontroller based design.
  • Selectable direct, dimmer, timer and flasher functions.
  • Over 60 minutes of constant use at full light.
  • Up to 5 hours of use with dimmed light.
  • Rugged & weather resistant, molded in ABS housing.
  • Reliable rotary switch for easy selection of all functions.
  • Easy-to-carry with molded handle and shoulder strap.
  • Uses internal 12V / 7Ah sealed lead-acid battery.
  • Internal SMPS battery charger for 90 to 270 Volt operation.
  • Low battery warning indicates exhausted battery.
  • Automatic low-voltage cut-off prevents deep discharge.
  • High reliability MOSFET for solid state switching.

SUPERLIGHT – 36LT

Powerful& Ultra throw Tactical Flashlight. Up to 3600LM and throw 431Meters.especially design for outdoor/sports/tactical/hunting/search & rescue activities. Body Size 25.4mm / Compatible with all 1″ rail mounting systems. USER-FRIENDLY, TACTICAL SWITCH DESIG: Users can have ON, ON/OFF switching, strobe and SOS all through pressing the tail switch. Professional tactical design with enlarged contact area fro easy use even when wearing gloves.

Features:

  • Beam Light CREE XHP LED
  • Powered by 18650 Battery
  • 12 VDC working Voltage
  • 55*229mm Entire Length
  • Durable Tempered Glass Lens
  • AR Film Plating On Lens
  • Scratch Resistance.
  • Stainless Steel Strike Bezel.
  • Anti-slide Grooves Design.

SUPERLIGHT – 9LT

Superlight 9LT is very powerful zoomable tactical flash light made up of light waited aluminum alloy body in black color. Micro USB charger with chargeable battery, zoomable features powered by 1 X 600 lumens LED, zoomable features makes it accurate and wrist wrap makes it secure.

Features:

  • Lumens: 600lm
  • Size:133mm(L)*37mm(Head D)
  • Function : High, Low, Strobe
  • Working voltage : 3,7 ~ 7,2V (maximum)
  • Reflector : Sleek aluminum
  • Net weight : 142g
  • Lens : Glass Reinforced

Maxlite – 10LW

MAXLITE-10LW is portable, very powerful rechargeable search light. It is designed for combat use (easy rifle mounted) under the most arduous conditions. Powered by Cree LED of 10W and 3.7V 4Ah lithium ion battery. Toughened glass cover for long life with weather protection up to IP65, very powerful, durable, light weight and easy to carry.

Features:

  • 10 W Cree LED light
  • 1200 lumen brightness light
  • 3.7 V, 4Ah Lithium rechargeable battery
  • IP 65 Weather protection
  • High impact resistance polymer body
  • Light weight easy to carry
  • Charging time 7 hrs
  • 3 hrs running time

Maxlite

MAXLIGHT is a very powerful rechargeable search light. It is designed for combat use under the most arduous conditions. It is equipped with deep focus, sealed beam units rated at 55 Watts. The bulb is highly resistant to shock and vibration. It has a built in CC/CV SMPS charger to optimally charge the sealed 12V/7AH battery at specified rating.

Features:

  • Brilliant 55 Watt halogen beam.
  • Exclusive one hand operation.
  • Over 60 minutes of constant use at full light.
  • Easy-to-carry with molded handle and shoulder strap.
  • Uses internal 12V / 7Ah sealed lead-acid battery.
  • Internal SMPS battery charger for 90 to 270 Volt operation.
  • Low battery warning indicates exhausted battery.
  • Automatic low-voltage cut-off prevents deep discharge.
  • High reliability MOSFET for solid state switching.

Maxlite-3LW

MAXLITE-3LW LED Searchlight is a range of high performance professional Search Light has been designed for safety and vigilance purpose.

The light MAXLITE-3LW comes with variety of user specific feature for maximum utilization LED lamps with proper visual signal. Clear operating instruction and notation short circuit protection. Over charge battery protection. Solid high quality plastic body specially designed.

MAXLITE-3LW Comes with Length: 210mm, Height: 140mm and Dia.: 120mm. We serve products, which not only solves the purpose of safety standard but also enhance the aesthetic beauty of the surrounding. Clients can avail this LED Searchlight at industry leading prices from us.

Features:

  • Brilliant 5W LED beam.
  • Reliable modular based design.
  • Uses internal 6V / 4.5Ah sealed lead-acid battery.
  • Low energy consumption, save 80% power comparing with traditional lights.
  • No UV or IR (infra-red) radiation, no mercury or lead, eco-friendly.
  • Instant start, no speckle, no flickering, no humming.
  • Solid state, high shock/vibration-resistant and water resistant.
  • Excellent heat dissipation due to unique structural design.
  • Battery to be charged Minimum for 6 Hrs. and Once a Week even if not in use.
  • Charging point is under the Handle.
  • Switch is Dual mode – Manual Flasher &Continuous.

Maxlite-5LW

MAXLIGHT-5LW is a very powerful rechargeable LED based search light. It is designed for combat use under the most arduous conditions.

Features:

  • Brilliant 10W LED beam.
  • Low energy consumption, save 80% power comparing with traditional lights.
  • No UV or IR (infra-red) radiation, no mercury or lead, eco-friendly.
  • Instant start, no speckle, no flickering, no humming.
  • Solid state, high shock/vibration-resistant and water resistant.
  • Excellent heat dissipation due to unique structural design.
  • Battery to be charged Minimum for 6 Hrs. and once a Week even if not in use.
  • Charging point is at back side.
  • Switch is Dual mode – Manual Flasher &Continuous.

Security Products

We believe that security must be loyal and safe in this world that’s why we provide our best. Guard Tour System is a comprehensive solution for busy Security Departments that require a System that fully tracks all the fields’ activity and task performed by their Security Personnel. The system works by installing a series Of RFID Tags along patrol routes and having patrolling personnel perform readings on the cards as they pass using the handheld readers The recorded card numbers and associated time stamps are later uploaded via communication adapters to computer for processing and verification. The results are either printed or displayed on the screen, where managers are able to review at once the job performance data of the patrolling personnel.

And we have other products like Under vehicle scanner with a range of variety makes your application effective.

Guard Track-GTX

Guard Tour System is a comprehensive solution for busy Security Departments that require a System that fully tracks all the fields activity and task performed by their Security Personnel. The system works by installing a series Of RFID Tags along patrol routes and having patrolling personnel perform readings on the cards as they pass using the handheld readers. The recorded card numbers and associated time stamps are later uploaded via communication adapters to computer for processing and verification. The results are either printed or displayed on the screen, where managers are able to review at once the job performance data of the patrolling personnel..

    Features:

  • Based on RFID contact-less technology.
  • Ensure that all checkpoints are visited at the specified times.
  • Tamper proof tags – can be embedded inside the walls.
  • Readings can be taken in all adverse conditions like snow, rain, dust.
  • Large data memory Capacity of over 30,000 records.
  • Event logging possible through Event Wallet.
  • User friendly software to generate patrol reports.
  • Reporting makes it possible to know where and when the patrols were made.
  • Increases accountability by providing proof of presence.
  • Handwritten log sheets are eliminated, saving hours each day.
  • Applications: Security Guard Patrol, Equipment Maintenance, Facility Management.
  • Janitorial Service, Recording of work hours and others specific to your environment.

Guard Track-GT

Guard Tour System is a comprehensive solution for busy Security Departments that require a System that fully tracks all the fields activity and task performed by their Security Personnel. The system works by installing a series Of RFID Tags along patrol routes and having patrolling personnel perform readings on the cards as they pass using the hand held readers. The recorded card numbers and associated time stamps are later uploaded via communication adapters to computer for processing and verification. The results are either printed or displayed on the screen, where managers are able to review at once the job performance data of the patrolling personnel.

    Features:

  • Ensure that all checkpoints are visited at the specified times.
  • Based on RFID contact-less technology.
  • Tamper proof tags – can be embedded inside the walls.
  • Large data memory Capacity of over 20,000 records.
  • Event logging possible through Event Wallet.
  • User friendly software to generate patrol reports.
  • Reporting makes it possible to know where and when the patrols were made.
  • Increases accountability by providing proof of presence.
  • Handwritten log sheets are eliminated, saving hours each day.
  • Applications: Security Guard Patrol, Equipment Maintenance, Facility Management.
  • Janitorial Service, Recording of work hours and others specific to your environment.

VIDSCAN

    Portable Digital Under Vehicle Inspection System

    Features:

  • Light weight and portable.
  • High resolution color camera with integrated illumination system.
  • Detachable color LCD display panel with sun protector.
  • Telescopic pole for all types of search operations.
  • SMPS battery charger for operation in 90-270V.
  • Articulating camera head (Optional).
  • Capability to store video for archiving (optional).
  • Useful for enforcement, building maintenance, armed forces.
  • Tactical operations, Search & rescue operations.

UVSM

    Trolley Mounted Under Vehicle Inspection Mirror

    Features:

  • Indispensable for inspecting the underside of vehicles for concealed explosives, weapons and contraband goods.
  • Designed for high durability and smooth operation on all surfaces.
  • Weatherproof powder coated steel trolley.
  • High density rubber wheels on ball bearings for smoother operation.
  • 24" x 12" high quality glass mirror, cushion mounted to absorb shocks.
  • Adjustable height of handle for ease of operation.
  • Available with flashlight, batteries, and mounting brackets.
  • Useful for enforcement, armed forces & security.

TVSM

Portable Telescopic Under Vehicle Inspection Mirror.

    Features:

  • Low cost unit – ideal for portable applications.
  • Provides easy viewing around corners or under vehicles.
  • Rugged & light weight aluminum construction.
  • Telescopic pole for all types of search operations.
  • Adjustable mirror head permits access to difficult areas.
  • Easy to use with least amount of user fatigue.
  • Equipped with flashlight and mounting bracket.
  • Useful for enforcement, building maintenance, armed forces & security.

Remote Wire Cutter

    Features:

  • A must for cutting wire of bomb or explosive device.
  • UHF remote control operation from a distance of up to 100 meters.
  • Digital coded signal to prevent cross operation between multiple units.
  • Equipped with heavy duty motor and shears.
  • Capable of cutting thick gauge wires and cables.
  • Operates on 12V SMF rechargeable battery.
  • SMPS charger to charge battery at voltages between 90V and 270V.

BDDS Tool Kits

    Features:

  • RSP Tool Kit.
  • EOD Tool Kit.
  • Hook and Line Kit.
  • Car Remote Opening Tool Kit.
  • Search Kit.
  • Thermal Cutter.
  • Mine Prodder.

Miscellaneous Security Products

  • HELIPAD LIGHT
  • Q-MANAGER
  • TRAFFIC CONE
  • CONVEX MIRROR
  • TRAFFIC JACKET
  • BATON LIGHT
[bws_google_captcha]